Product Description
It is suitable for use in digital control flame cutting machine
Structural Features：
1、The conventional cutting torch adopts an equal pressure : the gas is supplied at the same pressure as the inlet and outlet, with a large pressure difference from the preheating oxygen. In the short preheating oxygen channel in cutting nozzle, the gas and preheating oxygen are mixed in very short time to produce a preheating flame, this mixing is not sufficient and the gas utilization rate is low.
2、This inject style cutting torch adopts a jet pump structure: high-pressure preheating oxygen is sprayed out at high speed through the jet pump nozzle of the suction pipe, continuously taking away the gas in the suction chamber, forming a low-pressure zone in the suction chamber. The preheating oxygen and gas start to mix, and the mixed airflow passes through a longer preheating oxygen channel, keeping the flow rate and pressure same, fully mixing, improving the combustion rate of the gas, and reducing the unit energy consumption rate!
Product Parameters：
Model No | Thimble Length L (mm) | Total Length L1 (mm) | Rack Length L2 (mm) | Tube Diameter D (mm) |
SXSGJ-300 | 300 | 510 | 210 | 32 |
SXSGJ-350 | 350 | 560 | 210 | 32 |
